Pinch Pleated Sheers (Fire Retardant)

Made in the USA. This product is custom made for you and cannot be returned, except for defects. Please call customer service for assistance with ordering.

Light filtering sheer fabrics fashioned in our classic pinch pleated sheers softens the lines of any window, and provides a custom finish whether used alone or installed under draperies.

Our custom made pinch pleated sheer curtain drapery with a 2 to 1 ratio of fullness, is a popular, and versatile drapery style. Pinch Pleated Sheer Curtains are functional and versatile; you can effortlessly open and close them when installed on a traversing rod, or simply frame a window when used as stationary side panels.


Lengths longer that 101" will have one seam per panel on the outside section which hides underneath over drapery, call us toll free for a quote 866-886-3632.

All Pinch Pleated Sheer Drapery is FIRE RETARDANT AND FADE RESISTANT.

Colors: White, Winter White, or Champagne (call for fabric sample)

Our pinch pleated sheer curtains are made to measure sheers with the following attributes:
* Weighted corners
* 4" top buckram with double turn on top
* 1 1/2" double fold side hems blind stitched
* Bottom hem 4" double fold
* 100" Polyester, FIRE RETARDANT and fade resistant

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.


HOW TO MEASURE: Measure the total width of you rod, and add 12 inches to accommodate returns and overlap. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Consider stacking room, the amount of additional width on either side of window to completely clear window when drapery is open. Allow 1/3 times the width of the window. For a pair, distribute evenly on each side.

Made in the USA. This product is custom made for you and cannot be returned, except for defects. Please call customer service if you wish assistance with ordering.

Light filtering sheer fabrics fashioned in our classic pinch pleated sheers softens the lines of any window, and provides a custom finish whether used alone or installed under draperies.

Our custom made pinch pleated sheer drapery with a 2 1/2 to 1 ratio of fullness, is a popular, and versatile drapery style. Pinch Pleated Sheer Curtains are functional and versatile; you can effortlessly open and close them when installed on a traversing rod, or simply frame a window when used as stationary side panels.


Lengths longer that 101" will have one seam per panel on the outside section which hides underneath over drapes, call us toll free for a quote 866-886-3632.

All Pinch Pleated Sheer Drapery is FIRE RETARDANT AND FADE RESISTANT.

Colors: White, Winter White, or Champagne (call for fabric sample)

Our pinch pleated sheer curtains are made to measure sheers with the following attributes: * Weighted corners * 4" top buckram with double turn on top * 1 1/2" double fold side hems blind stitched * Bottom hem 4" double fold * 100" Polyester, FIRE RETARDANT and fade resistant Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.


HOW TO MEASURE: Measure the total width of you rod, and add 12 inches to accommodate returns and overlap. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Made in the USA.

Light filtering sheer voile fabrics fashioned in our classic pinch pleated sheers softens the lines of any window, and provides a custom finish whether used alone or installed under draperies.

Our custom made pinch pleated sheer curtain drapery with a 3 to 1 ratio of fullness, is a popular, and versatile drapery style. Pinch Pleated Sheer Curtains are functional and versatile; you can effortlessly open and close them when installed on a traversing rod, or simply frame a window when used as stationary side panels.


Lengths longer that 101" will have one seam per panel on the outside section which hides underneath over drapery, call us toll free for a quote 866-886-3632.

All Pinch Pleated Sheer Drapery is FIRE RETARDANT AND FADE RESISTANT.

Colors: White, Winter White, or Champagne (call for fabric sample)

Our pinch pleated sheer curtains are made to measure sheers with the following attributes:
* Weighted corners
* 4" top buckram with double turn on top
* 1 1/2" double fold side hems blind stitched
* Bottom hem 4" double fold
* 100" Polyester, FIRE RETARDANT and fade resistant

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.


HOW TO MEASURE: Measure the total width of you rod, and add 12 inches to accommodate returns and overlap. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Made in the U.S. and economically priced. This product is custom made for you and cannot be returned, except for defects. Please call customer service for assistance with ordering. Free fabric samples.

Light-filtering, semi-sheer fabrics fashioned in our classic Batiste pinch pleated sheers soften the lines of any window, and provide a custom finish whether used alone or installed under draperies.

Our custom made pinch pleated sheer curtain drapery with a two to one ratio of fullness is a popular and versatile drapery style. Pinch pleated sheer curtains are functional and versatile; You can effortlessly open and close them when installed on a traversing rod, or simply frame a window when used as stationary side panels.

All Pinch Pleated Sheer Drapery is fire retardant and fade resistant.

Colors: White, Winter White, or Champagne (call for fabric sample)

Our pinch pleated sheer curtains are made-to-measure sheers with the following attributes:

* Weighted corners

* 4" top buckram with double turn on top

* 1 1/2" double fold blind stitched side hems

* 4" double fold bottom hems

* Made of polyester, 100" long

* Fire retardant and fade resistant

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang; You must specify if you are electing for pin hooks to be set.

How to measure: Measure the total width of your rod, and add 12" to accommodate returns and overlap. Length is measured from top edge of drapery to bottom edge. If measuring to the floor, allow approximately 1" from the floor.

Batiste pinch pleated sheer draperies create a stunning look for your bedroom or living room. This is the epitome of romance. The white or champagne fabric is unapologetically dramatic as it cascades to the floor, highlighting your windows and creating an overall feeling of luxury and motion. Sweep them aside for a show-stopping window treatment that looks opulent from inside or out. Or keep these 100" long curtains hanging straight down over your windows for more privacy and a softly filtered light. Your room will always look fresh and current thanks to this fade-resistant fabric. Create the look you've always dreamed about with The Curtain Shop's Batiste pinch pleated sheer curtains.

Made in the USA. This product is custom made for you and cannot be returned, except for defects. Please call customer service if you wish assistance with ordering.

Light filtering semi sheer fabrics fashioned in our classic Batiste pinch pleated sheers softens the lines of any window, and provides a custom finish whether used alone or installed under draperies.

Our custom made pinch pleated sheer curtain drapery with a 2 1/2 to 1 ratio of fullness, is a popular, and versatile drapery style. Pinch Pleated Sheer Curtains are functional and versatile; you can effortlessly open and close them when installed on a traversing rod, or simply frame a window when used as stationary side panels.


Lengths longer that 101" will have one seam per panel on the outside section which hides underneath over drapery, call us toll free for a quote 866-886-3632.

All Pinch Pleated Sheer Drapery is FIRE RETARDANT AND FADE RESISTANT.

Colors: White, Winter White, or Champagne (call for fabric sample)

Our pinch pleated sheer curtains are made to measure sheers with the following attributes:
* Weighted corners
* 4" top buckram with double turn on top
* 1 1/2" double fold side hems blind stitched
* Bottom hem 4" double fold
* 100" Polyester, FIRE RETARDANT and fade resistant
Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.


HOW TO MEASURE: Measure the total width of you rod, and add 12 inches to accommodate returns and overlap. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Made in the USA. This product is custom made for you and cannot be returned.

FIRE RETARDANT and FADE RESISTANT light filtering sheer fabrics fashioned in our classic pinch pleated sheers softens the lines of any window, and provides a custom finish whether used alone or installed under draperies.

Our custom made pinch pleated sheer curtain drapery with a 3 to 1 ratio of fullness, is a popular, and versatile drapery style. Pinch Pleated Sheer Curtains are functional and versatile; you can effortlessly open and close them when installed on a traversing rod, or simply frame a window when used as stationary side panels.


Lengths longer that 101" will have one seam per panel on the outside section which hides underneath over drapery, call us toll free for a quote 866-886-3632.

Colors: White, Winter White, or Champagne (call for fabric sample)

Our pinch pleated sheer curtains are made to measure sheers with the following attributes:
* Weighted corners
* 4" top buckram with double turn on top
* 1 1/2" double fold side hems blind stitched
* Bottom hem 4" double fold
* 100" Polyester, FIRE RETARDANT and fade resistant

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.


HOW TO MEASURE: Measure the total width of you rod, and add 12 inches to accommodate returns and overlap. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Made in the USA. This product is custom made for you and cannot be returned, except for defects. Please call customer service for assistance with ordering. Fire retardant and fade resistant. Light filtering Slubbed Semi Sheer has a vertical soft raised linear design. Simple, elegant, and very stylish, it is fashioned in our classic pinch pleated sheers softening the lines of any window, and provides a custom finish whether used alone or installed under draperies. Our custom made pinch pleated sheer curtain drapery, is a popular, and versatile drapery style. Pinch Pleated sheer Curtains are functional and versatile; you can effortlessly open and close them when installed on a traversing rod, or simply frame a window when used as stationary side panels.

Unlimited lengths are available:
* Lengths up to 100" are seamless, and can be ordered online or over the phone.
* Longer lengths will have one seam near bottom of panel where a french seam extends the length in excess of 100". Call us toll free for a quote 866-886-3632.

All Pinch Pleated Sheer Drapery is FIRE RETARDANT AND FADE RESISTANT.

Colors: Marble, Winter White (call for fabric sample).

All pinch pleated sheer curtains are made to measure sheers with the following attributes: Three finger pleats, weighted corners, 4" top buckram with double turn on top 1 1/2", double fold side hems, blind stitched bottom hem 4" double fold, 100" Polyester.

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.

Fabric Content: 100% Polyester

HOW TO MEASURE: Measure the total width of you rod, and add 12 inches to accommodate returns and overlap. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

2 to 1 fullness means for every one foot across top of pleats there is two feet of fabric across bottom hem. 2 to 1 fulness is the industry standard for "ready made" pinch pleated drapery.

Made in the USA. This product is custom made for you and cannot be returned, except for defects. Please call customer service if you wish assistance with ordering. Fire retardant and fade resistant. Light filtering Slubbed Semi Sheer has a vertical soft raised linear design. Simple, elegant, and very stylish, it is fashioned in our classic pinch pleated sheers softening the lines of any window, and provides a custom finish whether used alone or installed under draperies. Our custom made pinch pleated sheer curtain drapery, is a popular, and versatile drapery style. Pinch Pleated sheer Curtains are functional and versatile; you can effortlessly open and close them when installed on a traversing rod, or simply frame a window when used as stationary side panels.

Unlimited lengths are available:
* Lengths up to 100" are seamless, and can be ordered online or over the phone.
* Longer lengths will have one seam near bottom of panel where a french seam extends the length in excess of 100". Call us toll free for a quote 866-886-3632.

All Pinch Pleated Sheer Drapery is FIRE RETARDANT AND FADE RESISTANT.

Colors: Marble, Winter White (call for fabric sample).

All pinch pleated sheer curtains are made to measure sheers with the following attributes: Three finger pleats, weighted corners, 4" top buckram with double turn on top 1 1/2", double fold side hems, blind stitched bottom hem 4" double fold, 100" Polyester.

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.

Fabric Content: 100% Polyester
,br> HOW TO MEASURE: Measure the total width of you rod, and add 12 inches to accommodate returns and overlap. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

2 1/2 to 1 ratio of fullness means for every one foot across top of pleats there is 2 1/2 feet of fabric across bottom hem, and is fuller than a standard ready made product of 2 to 1.

Made in the USA. This product is custom made for you and cannot be returned, please call customer service if you wish assistance with ordering. Fire retardant and fade resistant. Light filtering Slubbed Semi Sheer has a vertical soft raised linear design. Simple, elegant, and very stylish, it is fashioned in our classic pinch pleated sheers softening the lines of any window, and provides a custom finish whether used alone or installed under draperies. Our custom made pinch pleated sheer curtain drapery, is a popular, and versatile drapery style. Pinch Pleated sheer Curtains are functional and versatile; you can effortlessly open and close them when installed on a traversing rod, or simply frame a window when used as stationary side panels.

Unlimited lengths are available:
* Lengths up to 100" are seamless, and can be ordered online or over the phone.
* Longer lengths will have one seam near bottom of panel where a french seam extends the length in excess of 100". Call us toll free for a quote 866-886-3632.

All Pinch Pleated Sheer Drapery is FIRE RETARDANT AND FADE RESISTANT.

Colors: Marble, Winter White (call for fabric sample).

All pinch pleated sheer curtains are made to measure sheers with the following attributes: Three finger pleats, weighted corners, 4" top buckram with double turn on top 1 1/2", double fold side hems, blind stitched bottom hem 4" double fold, 100" Polyester.

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.

Fabric Content: 100% Polyester

HOW TO MEASURE: Measure the total width of you rod, and add 12 inches to accommodate returns and overlap. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

3 to 1 ratio of fullness means for every one foot across top of pleats there is three feet of fabric across bottom hem, and is much more custom looking than a standard ready made product with a 2 to 1 ratio.

Made in America, Lauren Semi Sheer Pinch Pleated Drapery is perfect for home or commercial use, and passes the 701 California test for fire retardant properties (certification of fire retardant capability are available upon request). Light filtering and translucent Lauren Semi Sheer features a beautiful novelty weave, and is so soft to the hand, it drapes beautifully across your window. Lauren Semi Sheer Pinch Pleated Panels offer light filtering while providing an element of privacy. The more fullness you request creates more privacy. Use our classic pinch pleated sheers under draperies or by themselves. Add a window topper to blend with your decor if desired.

Pinch Pleated Sheer Curtains are functional and versatile because you can effortlessly open and close them when installed on a traversing rod. Our standard three finger pleats can be tacked at top or bottom, or select the two finger pleat tacked at bottom or top. Additional pleat styles are available upon request.

Unlimited lengths are available:
Lengths up to 100" are seamless.

Longer lengths will have one french seam near bottom of panel, call us toll free for a quote 866-886-3632.

Lauren Semi Sheer Pinch Pleated Drapery are made to measure sheers with the following attributes:
* Weighted corners
* 4" top buckram with double turn on top
* 1 1/2" double fold side hems
* blind stitched Bottom hem 4" double folded
* 100" Polyester

Colors: Flax or Snow

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.

HOW TO MEASURE: Measure the total width of your rod, and add 12 inches for a pair to accommodate covering returns and center overlap. If returns will not be covered, add only 4 inches to your rod width for center overlap. For a single pinch pleated panel with no returns to cover, no need to add any additional inches. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Fabric is imported from Europe; Pinch Pleated Drapery is custom made in America.

Lauren Pinch Pleated Drapery can be machine washed in cold water and lined dried or dry cleaned (dry cleaning will enhance the fire retardant capability for many years.

Made in America, Lauren Semi Sheer Pinch Pleated Drapery is perfect for home or commercial use, and passes the 701 California test for fire retardant properties (certification of fire retardant capability are available upon request). Light filtering and translucent Lauren Semi Sheer features a beautiful novelty weave, and is so soft to the hand, it drapes beautifully across your window. Lauren Semi Sheer Pinch Pleated Panels offer light filtering while providing an element of privacy. The more fullness you request creates more privacy. Use our classic pinch pleated sheers under draperies or by themselves. Add a window topper to blend with your decor if desired.

Pinch Pleated Sheer Curtains are functional and versatile because you can effortlessly open and close them when installed on a traversing rod. Our standard three finger pleats can be tacked at top or bottom, or select the two finger pleat tacked at bottom or top. Additional pleat styles are available upon request.

Unlimited lengths are available:
Lengths up to 100" are seamless.

Longer lengths will have one french seam near bottom of panel, call us toll free for a quote 866-886-3632.

Lauren Semi Sheer Pinch Pleated Drapery are made to measure sheers with the following attributes:
* Weighted corners
* 4" top buckram with double turn on top
* 1 1/2" double fold side hems
* blind stitched Bottom hem 4" double folded
* 100" Polyester


Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.

HOW TO MEASURE: Measure the total width of your rod, and add 12 inches for a pair to accommodate covering returns and center overlap. If returns will not be covered, add only 4 inches to your rod width for center overlap. For a single pinch pleated panel with no returns to cover, no need to add any additional inches. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Fabric is imported from Europe; Pinch Pleated Drapery is custom made in America.

Lauren Pinch Pleated Drapery can be machine washed in cold water and lined dried or dry cleaned (dry cleaning will enhance the fire retardant capability for many years.

Made in America, Lauren Semi Sheer Pinch Pleated Drapery is perfect for home or commercial use, and passes the 701 California test for fire retardant properties (certification of fire retardant capability are available upon request). Light filtering and translucent Lauren Semi Sheer features a beautiful novelty weave, and is so soft to the hand, it drapes beautifully across your window. Lauren Semi Sheer Pinch Pleated Panels offer light filtering while providing an element of privacy. The more fullness you request creates more privacy. Use our classic pinch pleated sheers under draperies or by themselves. Add a window topper to blend with your decor if desired.

Pinch Pleated Sheer Curtains are functional and versatile because you can effortlessly open and close them when installed on a traversing rod. Our standard three finger pleats can be tacked at top or bottom, or select the two finger pleat tacked at bottom or top. Additional pleat styles are available upon request.

Unlimited lengths are available:
Lengths up to 100" are seamless.

Longer lengths will have one french seam near bottom of panel, call us toll free for a quote 866-886-3632.

Lauren Semi Sheer Pinch Pleated Drapery are made to measure sheers with the following attributes:
* Weighted corners
* 4" top buckram with double turn on top
* 1 1/2" double fold side hems
* blind stitched Bottom hem 4" double folded
* 100" Polyester


Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.

HOW TO MEASURE: Measure the total width of your rod, and add 12 inches for a pair to accommodate covering returns and center overlap. If returns will not be covered, add only 4 inches to your rod width for center overlap. For a single pinch pleated panel with no returns to cover, no need to add any additional inches. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Fabric is imported from Europe; Pinch Pleated Drapery is custom made in America.

Lauren Pinch Pleated Drapery can be machine washed in cold water and lined dried or dry cleaned (dry cleaning will enhance the fire retardant capability for many years.

Made in America, Norah Semi Sheer Pinch Pleated Drapery is a lovely woven fabric which is perfect for home or commercial use, and passes the 701 California test for fire retardant properties (certification of fire retardant capability are available upon request). Light filtering and translucent Norah Semi Sheer features a beautiful novelty weave, and is so soft to the hand, it drapes beautifully across your window. Norah Semi Sheer Pinch Pleated Panels offer light filtering while providing an element of privacy. The more fullness you request creates more privacy. Use our classic pinch pleated sheers under draperies or by themselves. Add a window topper to blend with your decor if desired.

Pinch Pleated Sheer Curtains are functional and versatile because you can effortlessly open and close them when installed on a traversing rod. Our standard three finger pleats can be tacked at top or bottom, or select the two finger pleat tacked at bottom or top. Additional pleat styles are available upon request.

Unlimited lengths are available:
Lengths up to 100" are seamless.

Longer lengths will have one french seam near bottom of panel, call us toll free for a quote 866-886-3632.

Norah Semi Sheer Pinch Pleated Drapery are made to measure sheers with the following attributes:
* Weighted corners
* 4" top buckram with double turn on top
* 1 1/2" double fold side hems
* blind stitched Bottom hem 4" double folded
* 100" Polyester

Colors: White, Winter White, Tusk, or Ice.

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.

HOW TO MEASURE: Measure the total width of your rod, and add 12 inches for a pair to accommodate covering returns and center overlap. If returns will not be covered, add only 4 inches to your rod width for center overlap. For a single pinch pleated panel with no returns to cover, no need to add any additional inches. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Fabric is imported from Europe; Pinch Pleated Drapery is custom made in America.

Norah Pinch Pleated Drapery can be machine washed in cold water and lined dried or dry cleaned (dry cleaning will enhance the fire retardant capability for many years.

Made in America, Norah Semi Sheer Pinch Pleated Drapery is a lovely woven fabric which is perfect for home or commercial use, and passes the 701 California test for fire retardant properties (certification of fire retardant capability are available upon request). Light filtering and translucent Norah Semi Sheer features a beautiful novelty weave, and is so soft to the hand, it drapes beautifully across your window. Norah Semi Sheer Pinch Pleated Panels offer light filtering while providing an element of privacy. The more fullness you request creates more privacy. Use our classic pinch pleated sheers under draperies or by themselves. Add a window topper to blend with your decor if desired.

Pinch Pleated Sheer Curtains are functional and versatile because you can effortlessly open and close them when installed on a traversing rod. Our standard three finger pleats can be tacked at top or bottom, or select the two finger pleat tacked at bottom or top. Additional pleat styles are available upon request.

Unlimited lengths are available:
Lengths up to 100" are seamless.

Longer lengths will have one french seam near bottom of panel, call us toll free for a quote 866-886-3632.

Norah Semi Sheer Pinch Pleated Drapery are made to measure sheers with the following attributes:
* Weighted corners
* 4" top buckram with double turn on top
* 1 1/2" double fold side hems
* blind stitched Bottom hem 4" double folded
* 100" Polyester

Colors: White, Winter White, Tusk, or Ice.

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.

HOW TO MEASURE: Measure the total width of your rod, and add 12 inches for a pair to accommodate covering returns and center overlap. If returns will not be covered, add only 4 inches to your rod width for center overlap. For a single pinch pleated panel with no returns to cover, no need to add any additional inches. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Fabric is imported from Europe; Pinch Pleated Drapery is custom made in America.

Norah Pinch Pleated Drapery can be machine washed in cold water and lined dried or dry cleaned (dry cleaning will enhance the fire retardant capability for many years.

Made in America, Norah Semi Sheer Pinch Pleated Drapery is a lovely woven fabric which is perfect for home or commercial use, and passes the 701 California test for fire retardant properties (certification of fire retardant capability are available upon request). Light filtering and translucent Norah Semi Sheer features a beautiful novelty weave, and is so soft to the hand, it drapes beautifully across your window. Norah Semi Sheer Pinch Pleated Panels offer light filtering while providing an element of privacy. The more fullness you request creates more privacy. Use our classic pinch pleated sheers under draperies or by themselves. Add a window topper to blend with your decor if desired.

Pinch Pleated Sheer Curtains are functional and versatile because you can effortlessly open and close them when installed on a traversing rod. Our standard three finger pleats can be tacked at top or bottom, or select the two finger pleat tacked at bottom or top. Additional pleat styles are available upon request.

Unlimited lengths are available:
Lengths up to 100" are seamless.

Longer lengths will have one french seam near bottom of panel, call us toll free for a quote 866-886-3632.

Norah Semi Sheer Pinch Pleated Drapery are made to measure sheers with the following attributes:
* Weighted corners
* 4" top buckram with double turn on top
* 1 1/2" double fold side hems
* blind stitched Bottom hem 4" double folded
* 100" Polyester

Colors: White, Winter White, Tusk, or Ice.

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.

HOW TO MEASURE: Measure the total width of your rod, and add 12 inches for a pair to accommodate covering returns and center overlap. If returns will not be covered, add only 4 inches to your rod width for center overlap. For a single pinch pleated panel with no returns to cover, no need to add any additional inches. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Fabric is imported from Europe; Pinch Pleated Drapery is custom made in America.

Norah Pinch Pleated Drapery can be machine washed in cold water and lined dried or dry cleaned (dry cleaning will enhance the fire retardant capability for many years.

Made in America, Bowen Semi Sheer Pinch Pleated Drapery is a lovely woven fabric which is perfect for home or commercial use, and passes the 701 California test for fire retardant properties (certification of fire retardant capability are available upon request). Light filtering and translucent Bowen Semi Sheer features a beautiful novelty weave, and is so soft to the hand, it drapes beautifully across your window. Bowen Semi Sheer Pinch Pleated Panels offer light filtering while providing an element of privacy. The more fullness you request creates more privacy. Use our classic pinch pleated sheers under draperies or by themselves. Add a window topper to blend with your decor if desired.

Pinch Pleated Sheer Curtains are functional and versatile because you can effortlessly open and close them when installed on a traversing rod. Our standard three finger pleats can be tacked at top or bottom, or select the two finger pleat tacked at bottom or top. Additional pleat styles are available upon request.

Unlimited lengths are available:
Lengths up to 100" are seamless.

Longer lengths will have one french seam near bottom of panel, call us toll free for a quote 866-886-3632.

Bowen Semi Sheer Pinch Pleated Drapery are made to measure sheers with the following attributes:
* Weighted corners
* 4" top buckram with double turn on top
* 1 1/2" double fold side hems
* blind stitched Bottom hem 4" double folded
* 100" Polyester

Colors: White, Winter White, Tusk, or Ice.

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.

HOW TO MEASURE: Measure the total width of your rod, and add 12 inches for a pair to accommodate covering returns and center overlap. If returns will not be covered, add only 4 inches to your rod width for center overlap. For a single pinch pleated panel with no returns to cover, no need to add any additional inches. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Fabric is imported from Europe; Pinch Pleated Drapery is custom made in America.

Norah Pinch Pleated Drapery can be machine washed in cold water and lined dried or dry cleaned (dry cleaning will enhance the fire retardant capability for many years.

Made in America, Bowen Semi Sheer Pinch Pleated Drapery is a lovely woven fabric which is perfect for home or commercial use, and passes the 701 California test for fire retardant properties (certification of fire retardant capability are available upon request). Light filtering and translucent Bowen Semi Sheer features a beautiful novelty weave, and is so soft to the hand, it drapes beautifully across your window. Bowen Semi Sheer Pinch Pleated Panels offer light filtering while providing an element of privacy. The more fullness you request creates more privacy. Use our classic pinch pleated sheers under draperies or by themselves. Add a window topper to blend with your decor if desired.

Pinch Pleated Sheer Curtains are functional and versatile because you can effortlessly open and close them when installed on a traversing rod. Our standard three finger pleats can be tacked at top or bottom, or select the two finger pleat tacked at bottom or top. Additional pleat styles are available upon request.

Unlimited lengths are available:
Lengths up to 100" are seamless.

Longer lengths will have one french seam near bottom of panel, call us toll free for a quote 866-886-3632.

Bowen Semi Sheer Pinch Pleated Drapery are made to measure sheers with the following attributes:
* Weighted corners
* 4" top buckram with double turn on top
* 1 1/2" double fold side hems
* blind stitched Bottom hem 4" double folded
* 100" Polyester

Colors: White, Winter White, Tusk, or Ice.

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.

HOW TO MEASURE: Measure the total width of your rod, and add 12 inches for a pair to accommodate covering returns and center overlap. If returns will not be covered, add only 4 inches to your rod width for center overlap. For a single pinch pleated panel with no returns to cover, no need to add any additional inches. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Fabric is imported from Europe; Pinch Pleated Drapery is custom made in America.

Bowen Pinch Pleated Drapery can be machine washed in cold water and lined dried or dry cleaned (dry cleaning will enhance the fire retardant capability for many years.

Made in America, Bowen Semi Sheer Pinch Pleated Drapery is a lovely woven fabric which is perfect for home or commercial use, and passes the 701 California test for fire retardant properties (certification of fire retardant capability are available upon request). Light filtering and translucent Bowen Semi Sheer features a beautiful novelty weave, and is so soft to the hand, it drapes beautifully across your window. Bowen Semi Sheer Pinch Pleated Panels offer light filtering while providing an element of privacy. The more fullness you request creates more privacy. Use our classic pinch pleated sheers under draperies or by themselves. Add a window topper to blend with your decor if desired.

Pinch Pleated Sheer Curtains are functional and versatile because you can effortlessly open and close them when installed on a traversing rod. Our standard three finger pleats can be tacked at top or bottom, or select the two finger pleat tacked at bottom or top. Additional pleat styles are available upon request.

Unlimited lengths are available:
Lengths up to 100" are seamless.

Longer lengths will have one french seam near bottom of panel, call us toll free for a quote 866-886-3632.

Bowen Semi Sheer Pinch Pleated Drapery are made to measure sheers with the following attributes:
* Weighted corners
* 4" top buckram with double turn on top
* 1 1/2" double fold side hems
* blind stitched Bottom hem 4" double folded
* 100" Polyester

Colors: White, Winter White, Tusk, or Ice.

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.

HOW TO MEASURE: Measure the total width of your rod, and add 12 inches for a pair to accommodate covering returns and center overlap. If returns will not be covered, add only 4 inches to your rod width for center overlap. For a single pinch pleated panel with no returns to cover, no need to add any additional inches. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Fabric is imported from Europe; Pinch Pleated Drapery is custom made in America.

Bowen Pinch Pleated Drapery can be machine washed in cold water and lined dried or dry cleaned (dry cleaning will enhance the fire retardant capability for many years.

Made in America, Hawthorn Semi Sheer Pinch Pleated Drapery is a lovely woven fabric which is perfect for home or commercial use, and passes the 701 California test for fire retardant properties (certification of fire retardant capability are available upon request). Light filtering and translucent Hawthorn Semi Sheer features a beautiful novelty weave, and is so soft to the hand, it drapes beautifully across your window. Hawthorn Semi Sheer Pinch Pleated Panels offer light filtering while providing an element of privacy. The more fullness you request creates more privacy. Use our classic pinch pleated sheers under draperies or by themselves. Add a window topper to blend with your decor if desired.

Pinch Pleated Sheer Curtains are functional and versatile because you can effortlessly open and close them when installed on a traversing rod. Our standard three finger pleats can be tacked at top or bottom, or select the two finger pleat tacked at bottom or top. Additional pleat styles are available upon request.

Unlimited lengths are available:
Lengths up to 100" are seamless.

Longer lengths will have one french seam near bottom of panel, call us toll free for a quote 866-886-3632.

Hawthorn Semi Sheer Pinch Pleated Drapery are made to measure sheers with the following attributes:
* Weighted corners
* 4" top buckram with double turn on top
* 1 1/2" double fold side hems
* blind stitched Bottom hem 4" double folded
* 100" Polyester

Colors: Snow, Tusk, Bone, or Silver.

Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify.

HOW TO MEASURE: Measure the total width of your rod, and add 12 inches for a pair to accommodate covering returns and center overlap. If returns will not be covered, add only 4 inches to your rod width for center overlap. For a single pinch pleated panel with no returns to cover, no need to add any additional inches. Length is measured from top edge of drapery to bottom edge. If measuring to floor, allow approximately one inch from floor.

Fabric is imported from Europe; Pinch Pleated Drapery is custom made in America.

Hawthorn Pinch Pleated Drapery can be machine washed in cold water and lined dried or dry cleaned (dry cleaning will enhance the fire retardant capability for many years.