Made in America, we can make any width and length. Lengths longer than 101″ will have one seam per panel on the outside section which hides underneath over drapery. Custom Pinch Pleated Sheers pass the California 701 test for FIRE RETARDANT AND FADE RESISTANT, making them perfect for both commercial and home use.
Light filtering sheer fabrics fashioned in our classic pinch pleated sheers soften the lines of any window and provides a custom finish whether used alone or installed under drapes.
Our custom-made pinch pleated sheer curtain drapery with a 2 to 1 ratio of fullness, is a popular, and versatile drapery style. Pinch Pleat Sheer Curtains are functional and versatile; you can effortlessly open and close them when installed on a traversing rod, or simply frame a window when used as stationary side panels. They look luxurious in any room and with neutral color options, complement nearly all furniture and bedding.
Colors: White, Winter White, or Champagne (call for fabric sample)
Our pinch pleated sheer curtains are made to measure sheers with the following attributes:
* Weighted corners
* 4″ top buckram with double turn on top
* 1 1/2″ double fold side hems blind stitched
* Bottom hem 4″ double fold
* 100″ Polyester, FIRE RETARDANT and fade resistant
Pin hooks can be set in place for an additional charge, either the standard wall hang or ceiling hang. If electing pin hooks to be set, must specify by calling us.
For pinch pleated drapery, the fullness is already built in to the pleats. The only thing for you to decide is the desired fullness you want built into the pleats. Choose either a 2 to 1, 2.5 to 1, or 3 to 1 ratio of fullness. 4 to 1 fullness is also available upon request. An example is for a 2.5 to 1 fullness, for every 2-1/2 inches across the pleats at top of panel, you will have 5 inches of material on the bottom hem and throughout the curtain panel. The fuller the curtain panel, the more luxurious and custom looking your window dressing be.
HOW TO MEASURE: Measure the total width of your curtain rod to be covered. For a pair add 4 inches for center overlap. Add additional 8 inches to cover returns on both sides. A single panel with no returns is simply the width of the curtain rod you plan to cover. Length is measured from the top edge of the drapery to the bottom edge. If measuring to floor, allow approximately one inch from the floor.
Consider stacking room, the amount of additional width on either side of the window to completely clear the window when the drapery is open. Allow 1/4 times the width of the window. For a pair, distribute stacking room evenly on each side.
HOW TO MEASURE: Measure the total width of your rod. For a pair add 4 inches to cover center overlap. If covering returns (distance from the front of rod to the wall) add another 8 inches. For a single panel covering no returns use the total width of your curtain rod that you want to cover. Length is measured from the top edge of the drapery to the bottom edge. If measuring to the floor, allow approximately one inch from the floor. Call us before ordering toll free a 1-800-385-4211 to insure proper width measurement.
We also have a large program of beautiful sheer woven fabrics in white, off white, cream or grey. Fabric samples are free upon request.